IEI Integration IDS-H61 - Manual (Page 24)

IDS-H61 Digital Signage Player
Page 14
Step 3: Secure the SDHC card with the slot cover by fastening the previously removed
retention screw.
3.3 HDD Installation
The IDS-H61 has a 2.5” HDD bay inside the top cover. To install to an HDD, follow the
steps below.
Step 1: Remove the top cover by removing the four retention screws on both side panels
(two on each side). See Figure 3-3.
Figure 3-3: Top Cover Retention Screws
Step 2: Locate the HDD bracket inside the top cover. Remove the four HDD bracket
retention screws and lift the HDD bracket.
Figure 3-4: HDD Bracket Retention Screws