C.2.4 building the recovery partition, Figure c-6: launching the recovery tool, C.2.4 ) – IEI Integration ECN-360A-D2550 User Manual
Page 104
Advertising
ECN-360A-D2550 Em b e d d e d S ys te m
P a g e 93
C.2.4 Bu ild in g th e Re c o ve ry P a rtitio n
S te p 1:
Put the recover CD in the optical drive.
S te p 2:
Start the system.
S te p 3:
Boot the system from the recovery CD. When prompted, press any key to
boot from the recovery CD. It will take a while to launch the recovery tool. Please
be patient!
Figure C-6: Launching the Recovery Tool
S te p 4:
When the recovery tool setup menu appears, press <2> then <Enter>.
Figure C-7: Manual Recovery Environment for Windows
Advertising