IEI Integration EBC-3200 - Manual (Page 5)

EBC-3200 QIG IEI Technology Corp. Page 5
Figure 10: HDD Retention Screws
Step 4: Install the HDD into the chassis with three
retention screws.
Figure 11: HDD Installation
STEP 6: RISER CARD INSTALLATION
(OPTIONAL)
To install the optional PCI/PCIe riser card, please follow the
steps below.
Step 1: Remove the expansion slot bracket.
Step 2: Locate the PCI or PCIe slot on the motherboard.
Step 3: Insert the PCI or PCIe riser card into the PCI or
PCIe slot on the motherboard.
Figure 12: PCI/PCIe Riser Card Installation
Step 4: Insert the PCI or PCIe expansion card into the
PCI or PCIe slot on the riser card.
Step 5: Reinstall the expansion slot bracket.
Step 6: Secure the expansion card with the chassis by
one retention screw. Step 0:
Figure 13: PCI/PCIe Expansion Card Installation
STEP 7: CABLING
S TEP 5.1: F RONT PANEL CABLE CONNECTION
There are buttons, LEDs and ports on the front panel of the
EBC-3200 chassis.
o 1 x Power LED
o 1 x HDD LED
o 1 x Power switch
o 1 x Reset button
o 2 x USB ports
These components are all connected to the motherboard
with cables. To correctly connect these cables, please refer
to the user manual that came with the motherboard. The
connectors that are provided with the chassis are listed
below.
No. Name
1
Power LED cable
1
Reset Switch cable
1
HDD LED cable
1
Power switch cable