IEI Integration EBC-3200 - Manual (Page 6)

EBC-3200 QIG IEI Technology Corp. Page 6
2
USB cable
Table 3: Chassis Connectors
The pin definitions for the USB cable are shown below.
PIN No. Description Color
1 +5V Red
2 D- Dark Yellow
3 D+ Yellow
4 GND Brown
Table 4: Pin Definitions of USB Cable
S
TEP 5.2: F AN CABLE CONNECTION
To correctly connect the system fan cable from the system fan to the
motherboard, please refer to the user manual that came with the
motherboard.
S
TEP 5.3: HDD CABLE CONNECTION
To correctly connect the HDD SATA cable and SATA power
cable from the HDD to the motherboard, please refer to the
user manual that came with the motherboard.
STEP 8: WALL-MOUNT PLATES
INSTALLATION
Two wall-mount plates are shipped with the EBC-3200 chassis. The
wall-mount plates are installed on the sides, at the bottom of the
chassis. Each plate is secured to the chassis by two retention
screws. To install the wall-mount plates, please follow the steps
below.
Step 1: Align the retention screw holes in the wall-mount
plate with the retention screw holes on the side of
the chassis.
Step 2: Insert two retention screws for each wall-mount
plate.
Step 0:
Figure 14: Wall-mount Plate Retention Screws