IEI Integration UPC-V315-QM77 - Manual (Page 46)

UP C-V315-QM77 P a n e l P C
P a g e 35
3.7.7 LAN Co n n e c to r
To connect the UPC-V315-QM77 to a network through the RJ-45 LAN connector, follow
the steps below.
S te p 1: Locate the RJ-45 connector. The location of the RJ-45 connectors is shown in
Figure 1-4.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the UPC-V315-QM77. See Figure 3-23.
Figure 3-23: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.
Figure 3-24: RJ-45 Ethernet Connector