IEI Integration PPC-5xxx-9455 v1.10 - Manual (Page 63)

PPC-5xxx-9455 Panel PC
Page 45
4.5.4 CF Card Setup (JP7)
The CF Card Setup jumper configures a CF card as either the IDE slave or IDE master.
JP7 DESCRIPTION
Open Slave
Close Master
Table 4-6: CF Card Setup Jumper Settings
4.5.5 COM Port RI and Voltage Selection (JP3, JP4, JP5, JP6, JP8)
Use the COM port settings jumpers to select the voltage of serial port pin 9.
JP3 COM1 Pin-9 Setting
1-2 12 V
3-4 RI
5-6 5 V
Table 4-7: COM1 RI and Voltage Selection Jumper
JP4 COM2 Pin-9 Setting
1-2 12 V
3-4 RI
5-6 5 V
Table 4-8: COM2 RI and Voltage Selection Jumper
JP5 COM3 Pin-9 Setting
1-2 12 V
3-4 RI
5-6 5 V
Table 4-9: COM3 RI and Voltage Selection Jumper