IEI Integration PPC-37xxA-N26 v1.00 - Manual (Page 54)

PPC-37xxA-N26 Panel PC
Page 38
the wall (
7
Figure 3-25 ). This step is to avoid the panel PC being pushed apart
from the wall-mounting bracket accidentally. Step 0:
Figure 3-25: Secure the Chassis
3.10.2 Panel Mounting
3.10.2.1 PPC-3708A-N26 and PPC-3710A-N26
To mount the PPC-3708A-N26 or PPC-3710A-N26 panel PC into a panel, please follow
the steps below.
Step 1: Select the position on the panel to mount the PPC-37xxA-N26.
Step 2: Cut out a section of the panel that corresponds to the rear panel dimensions of
the panel PC. The recommended cutout sizes are shown below (Figure 3-26
and Figure 3-27).