IEI Integration PPC-37xxA-N26 v1.00 - Manual (Page 60)

PPC-37xxA-N26 Panel PC
Page 44
Figure 3-34: Installing into a Rack/Cabinet
Step 5: Once the panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 3-34).
3.10.3.2 PPC-3710A-N26 and PPC-3712A -N26
Step 1: The back of the aluminum frame surrounding the LCD screen has retention
screw holes (PPC-3710A-N26 has 10 holes and PPC-3712A -N26 has 8 holes)
for a cabinet/rack installation bracket.
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the panel PC and the rack/cabinet into which the
panel PC is installed.