IEI Integration AFL-4 series-N270 v2.10 - Manual (Page 59)

AFL-4 Series-N270 User Manual
Page 59
Figure 4-13: MCU LCD Type Jumper Location
4.9.11 Touch Screen Select
Jumper Label: J1
Jumper Type: 4-pin header
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-8
The Touch Screen Select jumper sets the touch screen as resistive 4 or 5 wire.
Setting Description
Short 1-2 5W
Short 3-4 4W
Table 4-11: Touch Screen Select Jumper Settings
The Touch Screen Select jumper location is shown in Figure 4-8.