IEI Integration AFL-4 series-N270 v2.10 - Manual (Page 71)

AFL-4 Series-N270 User Manual
Page 71
4.11.3 USB Device Connection
There are four external USB 2.0 connectors. All connectors are perpendicular to the
AFL-4 Series-N270. To connect a USB 2.0 or USB 1.1 device, please follow the
instructions below.
Step 1: Locate the USB connectors. The locations of the USB connectors are shown
in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 4-29.
Figure 4-29: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0:
4.12 Faceplate Installation
An optional faceplate in a variety of colors is available for mounting onto the AFL-4
Series-N270 frame.