IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.10 - Manual (Page 69)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 57
Î Select RS232 or RS422/RS485 [RS/232]
Select the communication method for Serial Port 3.
Î
RS232 D EFAULT
Serial Port 2 signaling mode is RS-232
Î
RS485 Serial Port 2 signaling mode is RS-485
Î
RS422 Serial Port 2 signaling mode is RS-422
Î Serial Port4 Address [2E8]
Selects the serial port base address.
Î
Disabled
No base address
Î
2E8 D EFAULT I/O address 2E8
Î Serial Port4 IRQ [10]
Use the Serial Port4 IRQ option to select the interrupt address for serial port 4.
Î
10 D EFAULT
IRQ address 10
3.4 PCI/PnP
Use the PCI/PnP menu (BIOS Menu 15) to configure advanced PCI and PnP settings.
WARNING!
Setting wrong values for the BIOS selections in the PCIPnP BIOS
menu may cause the system to malfunction.