C.1 one key recovery introduction, Ecovery, Ntroduction – IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v1.06 User Manual
Page 101: Figure c-1: iei one key recovery tool menu
AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 89
C.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure C-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
76
Figure C-1
) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
76
C.2.1
)
2. Create partitions (see Section
76
C.2.2
)
3. Install operating system, drivers and system applications (see Section
76
C.2.3
)
4. Build-up recovery partition (see Section
76
C.2.4
)
5. Create factory default image (see Section
76
C.2.5
)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
76
C.4
.
NOTE:
The initial setup procedures for Linux system are described in
Section
76
C.3
.