IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v1.06 - Manual (Page 46)

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 34
3.3.2 IDE Configuration
Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
IDE Configuration
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
SATA#1 Configuration
[Compatible]
Configure SATA#1 as [IDE]
> Primary IDE Master
: [Not Detected]
> Secondary IDE Master : [Optiarc CDRWD]
Options
Disabled
Compatible
Enhanced
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
Î SATA#1 Configuration [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Î
Disabled Disables the on-board ATA/IDE controller.
Î
Compatible D EFAULT
The SATA drive is configured on an IDE channel.
Î
Enhanced Both IDE and SATA channels are configured
separately.
Î Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
Î
IDE D EFAULT
Configures SATA devices as normal IDE device.
Î
RAID
Used when a RAID setup is installed
Î
AHCI Enables advanced SATA drive features