Figure 3-10: af-12a-n26 hdd retention screws, Figure 3-11: af-12a-n26 hdd installation – IEI Integration AFL-ххA-N26 User Manual
Page 40
Advertising
AFL-xxA-N26 Series Panel PC
Page 40
Figure 3-10: AF-12A-N26 HDD Retention Screws
Step 4:
Install the HDD into the AF-12A-N26 by aligning the retention screw holes in the
HDD brackets with the retention screw holes on the chassis. Insert the four
retention screws.
Step 5:
Connect the SATA cable and the SATA power cable to the connectors on the
motherboard.
Figure 3-11: AF-12A-N26 HDD Installation
Step 6:
Replace the aluminum back cover to the chassis.
Step 7:
Replace the plastic back cover.
Step 0:
Advertising
This manual is related to the following products: