IEI Integration AFL-ххA-N26 - Manual (Page 90)

AFL-xxA-N26 Series Panel PC
Page 90
Î Power Saving Function [Disabled]
Use the Power Saving Function BIOS option to enable or disable the power saving
function.
Î
Disabled D EFAULT
Power saving function is disabled.
Î
Enabled Power saving function is enabled. It will reduce power
consumption when the system is off.
Î Set Spread Spectrum fucntion [Disabled]
Use the Set Spread Spectrum function option to reduce the EMI. Excess EMI is
generated when the system clock generator pulses have extreme values. Spreading the
pulse spectrum modulates changes in the extreme values from spikes to flat curves, thus
reducing the EMI. This benefit may in some cases be outweighed by problems with
timing-critical devices, such as a clock-sensitive SCSI device.
Î
Disabled D EFAULT
EMI not reduced
Î
Enabled EMI reduced