IEI Integration AFL-xxA-N270-Series v1.03 - Manual (Page 72)

AFL-xxA-N270 Series Panel PC
Page 56
4.11.3 USB Device Connection
There are two external USB 2.0 connectors. All connectors are perpendicular to the
AFOLUX AFL-xxA-N270 Series. To connect a USB 2.0 or USB 1.1 device, please follow
the instructions below.
Step 1: Located the USB connectors . The locations of the USB connectors are shown
in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 4-27.
Figure 4-27: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0: