IEI Integration AFL-xxA-N270-Series v1.03 - Manual (Page 77)

AFL-xxA-N270 Series Panel PC
Page 61
Figure 5-3: AFL-10A-N270 Aluminum Back Cover Retention Screws
Step 2: Lift the aluminum cover off the AFL-xxA-N270 series. Step 0:
5.5 Replacing Components
5.5.1 Memory Module Replacement
The flat panel PC is preinstalled with a 1 GB DDR2 memory module. If the memory
module is fail, follow the instructions below to replace the memory module.
Step 1: Remove the back cover. See Section 5.4.1 above.
Step 2: Remove the internal aluminum back cover. See Section 5.4.2 above.
Step 3: Locate the DDR2 SO-DIMM on the motherboard (Figure 5-4).
Figure 5-4: AFL-10A-N270 SO-DIMM Socket Location