6 cf card installation – IEI Integration AFL-xxA-N270-Series v2.20 User Manual
Page 45
Advertising
AFL-xxA-N270 Series Panel PC
Page 31
4.6 CF Card Installation
The AFL-xxA-N270 series has one CF Type II slot inside the rear panel. To install the CF
card, follow the instructions below.
Step 1:
Locate the CF slot. Insert a CF card into the slot (Figure 4-3).
Figure 4-3: CF Card Location
Step 2:
Replace the plastic back cover. For AFL-08AH-N270, more strength is required
when pushing the bottom part of the cover down to the chassis (Figure 4-4).
Figure 4-4: AFL-08AH-N270 Plastic Back Cover Replacement
Step 3:
Once replaced reinsert the nine previously removed retention screws.
Step 0:
Advertising