IEI Integration AFL-xxA-N270-Series v2.20 User Manual
Page 73
Advertising
AFL-xxA-N270 Series Panel PC
Page 59
Figure 5-1: Back Cover Retention Screws
Step 4:
Lift the cover off and pull down the cover a bit to make it possible to lift the cover
further more after removing the retention screws (Figure 4-2). More strength is
required to separate the cover from the chassis.
Figure 5-2: AFL-xxA-N270 Plastic Back Cover Removal
5.4.2 AFL-xxA-N270 Series Internal Aluminum Cover Removal
To remove the internal aluminum cover, follow the steps below.
Step 1:
Remove the retention screws securing the internal aluminum cover. The screw
numbers are varied in different models. Figure 5-3 shows the aluminum cover
retention screws of the AFL-10A-N270.
Advertising