3 usb device connection – IEI Integration AFL-xxA-N270-Series v2.30 User Manual
Page 70
Advertising
AFL-xxA-N270 Series Panel PC
Page 54
4.11.3 USB Device Connection
There are two external USB 2.0 connectors. To connect a USB 2.0 or USB 1.1 device,
please follow the instructions below.
Step 1:
Located the USB connectors
. The locations of the USB connectors are shown
in Chapter 2.
Step 2:
Align the connectors.
Align the USB device connector with one of the
connectors on the bottom panel. See Figure 4-28.
Figure 4-28: USB Device Connection
Step 3:
Insert the device connector.
Once aligned, gently insert the USB device
connector into the onboard connector.
Step 0:
Advertising