Figure 3-2: back cover retention screws, Figure 3-3: aluminum cover retention screws – IEI Integration AFL-W10A-N270 v2.13 User Manual
Page 54
Advertising
AFL-W10A-N270 User Manual
Page 54
Figure 3-2: Back Cover Retention Screws
Step 5:
Lift the cover and pull down the cover a bit to make it possible to fully remove it.
More strength is required to separate the cover from the chassis.
Step 6:
Remove the retention screws (Figure 3-3) from the aluminum cover.
Figure 3-3: Aluminum Cover Retention Screws
Step 7:
Lift the cover off.
Advertising