IEI Integration AFL-W10A-N270 v3.10 - Manual (Page 48)

AFL-W10A-N270 User Manual
Page 48
Step 2: Align the connector. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-W10A-N270. See Figure
2-19 .
Figure 2-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
2.7.2 Serial Device Connection
The AFL-W10A-N270 has two DB-9 connectors for connecting to RS-232 and
RS-232/422/485 serial devices on the bottom panel. Follow the steps below to connect a
serial device to the AFL-W10A-N270 panel PC.
Step 1: Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 3 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 2-20.