IEI Integration AFL-W10A-N270 v3.10 - Manual (Page 64)

AFL-W10A-N270 User Manual
Page 64
 Brand String: Lists the brand name of the CPU being used
 Frequency: Lists the CPU processing speed
 FSB Speed: Lists the FSB speed
 Cache L1: Lists the CPU L1 cache size
 Cache L2: Lists the CPU L2 cache size
4.3.2 IDE Configuration
Use the IDE Configuration menu (
5
BIOS Menu 4 ) to change and/or set the configuration
of the IDE devices installed in the system.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
IDE Configuration

ATA/IDE Configuration [Compatible]
Legacy IDE Channels [SATA Pri, PATA SEC]
> Primary IDE Master
: [Not Detected]
> Primary IDE Slave : [Not Detected]
> Secondary IDE Master : [Not Detected]
> Secondary IDE Slave : [Not Detected]
Disabled
Compatible
Enhanced
 Select
Screen
  Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 4: IDE Configuration
 ATA/IDE Configurations [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
 Disabled Disables the on-board ATA/IDE controller.

Compatible D EFAULT
Configures the on-board ATA/IDE controller to be in
compatible mode. In this mode, a SATA channel will
replace one of the IDE channels. This mode supports up
to 4 storage devices.
 Enhanced Configures the on-board ATA/IDE controller to be in