IEI Integration AFL-F08A v1.01 - Manual (Page 56)

AFL-F08A Panel PC
Page 44
4.6 Reinstalling the Covers
Replacement is opposite to removal. First replace the aluminum cover, then the plastic
cover.
4.7 Software Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
Installation instructions are given below.
Step 1: Insert the CD-ROM that came with the system into a CD-ROM drive attached to
the system.
Step 2: Click AFL-F08A.
Step 3: The list of drivers appears.
Figure 4-5: Drivers
Step 4: Install the drivers as required. Step 0: