IEI Integration AFL-F08A v2.10 - Manual (Page 29)

AFL-F08A-N270 Panel PC
Page 17
Step 1: Undo the CompactFlash® cover fastening screw.
Figure 3-3: CompactFlash® Card Cover
Step 2: Slide the CompactFlash® card into the slot under the cover.
Figure 3-4: CompactFlash® Install
Step 3: Once installed, replace the cover and screw. Step 0:
3.6 Internal Cover Removal
To change jumper settings and to access most internal parts, the internal aluminum cover
needs to be removed. To remove this cover, please follow the steps below.