1 unpack the panel pc, 1 packing list, Npack the – IEI Integration AFL-08B-N270 v2.10 User Manual
Page 22: Anel
AFL-08B-N270 User Manual
Page 22
2.1 Unpack the Panel PC
To unpack the panel PC, follow the steps below:
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during installation
process.
Step 1:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2:
Open the outside box.
Step 3:
Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4:
Open the inside box.
Step 5:
Lift the monitor out of the boxes.
Step 6:
Remove the peripheral parts box from the main box.
2.1.1 Packing List
The AFL-08B-N270 panel PC is shipped with the following components:
Quantity Item
Image
1 AFL-08B-N270
1 Power
adapter
P/N: 63000-FSP0401ADF03A822-RS