9 bottom panel connectors, 1 lan connection – IEI Integration AFL-F08A v2.40 User Manual
Page 51
AFL-F08A-N270 Panel PC
Page 36
Figure 3-21: Install into a Rack/Cabinet
Step 5:
Once the AFL-F08A-N270 with the attached rack/cabinet bracket has been
properly inserted into the rack or cabinet, secure the front of the rack/cabinet
bracket to the front of the rack or cabinet (
77
Figure 3-21
).
3.9 Bottom Panel Connectors
This section provides and overview of the connectors on the bottom panel.
3.9.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors
on the bottom panel of the AFL-F08A-N270.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-F08A-N270.