IEI Integration AFL-F08A v2.40 - Manual (Page 56)

AFL-F08A-N270 Panel PC
Page 41
Step 2: Press the power on/off function key on the front panel to wake the function keys.
All of the function keys light up with high intensity light. Remove the finger from
the function key.
Step 3: Press the power on/off function key again and hold down for five (5) seconds
until all function keys start flashing. After a five-time flash, the system starts to
boot-up. The power on/off function key is shown in
767
Figure 3-25 .
Figure 3-25: Power On/Off Function Key
3.11 Powering Off the System
To power-off the AFL-F08A-N270 using the function key, please follow the steps below:
Step 1: Press the power on/off function key on the front panel to wake the function keys.
Step 2: Press the power on/off function key again and hold down the power on/off
function key for five (5) seconds until all function keys start flashing. After a
five-time flash, the system starts to power off the system.
NOTE:
The function keys will not take effect when they are in the suspended state (with
low intensity light). Users must wake the function keys first by pressing it once
and remove the finger when the function keys light up. Then, hold down the
power on/off function key for five seconds to power on/off the system.