IEI Integration AFL2-17A-H61 v1.23 - Manual (Page 272)

AFL2-17A/AB-H61 P a n e l P C
P a g e 252
C.7 Oth e r In fo rm a tio n
C.7.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r
When the system uses AHCI mode or some specific SATA controllers such as ALi M5283
or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key
recovery. Please follow the steps below to install the SATA RAID/AHCI driver.
S te p 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into
a USB floppy disk drive. The SATA RAID/AHCI driver must be especially
designed for the on-board SATA controller.
S te p 19: Connect the USB floppy disk drive to the system.
S te p 20: Insert the One Key Recovery CD into the system and boot the system from the
CD.
S te p 21: When launching the recovery tool, press <F6>.