IEI Integration AFL2-17A-H61 v1.23 - Manual (Page 86)

AFL2-17A/AB-H61
P a g e 66
Figure 5-21: Mounting screw location
S te p 2: Align the bracket with the screw holes.
S te p 3: To secure the bracket to the AFL2-17A/AB-H61, insert the retention screws into
the screw holes and tighten them. S te p 0:
5.13.4 Arm Mo u n tin g
The AFL2-17A/AB-H61 is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 100mm interface pad. To mount the AFL2-17A/AB-H61
on an arm, please follow the steps below.
S te p 9: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.