Figure 3-30: rj-45 serial port connector, Figure 3-31: db-9 connector pinout locations, Table 3-1: db-9 connector pinout – IEI Integration AFL2-W10A-N28 User Manual
Page 62
Advertising
AFL2-W10A-N28 Panel PC
Page 44
Figure 3-30: RJ-45 Serial Port Connector
Step 4:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
The DB-9 connector pinouts are listed below.
Figure 3-31: DB-9 Connector Pinout Locations
PIN NO.
RS-232
RS-422
RS-485
1 DCD RX+ -
2 RX
RX- -
3 TX
TX+ DATA+
4 DTR TX- DATA-
5 GND -
-
6 DSR -
-
7 RTS -
-
8 CTS -
-
9 RI
-
-
Table 3-1: DB-9 Connector Pinout
Advertising