IEI Integration IOVU-751R - Manual (Page 35)

IOVU-751R-CE5/UX-R10 User Manual
Page 26
4.2.2.3 Connecting the Serial Port
The IOVU-751R-CE5/UX-R10 has two female DB-9 connectors on the external peripheral
interface panel for a serial device. Follow the steps below to connect a serial device to the
IOVU-751R-CE5/UX-R10.
Step 1: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See
211H211H
Figure 4-5 .
Figure 4-5: Serial Device Connector
Step 2: Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
4.2.3 USB Connectors
4.2.3.1 USB Pinouts
USB devices connect directly to the USB connectors on the external peripheral connector
panel.
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 5 VCC
2 D1- 6 D2-