IEI Integration IOVU-751R - Manual (Page 45)

IOVU-751R-CE5/UX-R10 User Manual
Page 36
4.3.4 Stand Mounting
The IOVU-751R has Video Electronics Standards Association (VESA) standard mounting
holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA
hole pattern. To mount the IOVU onto a stand, please follow the steps below.
Step 1: Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor stand mounting plate.
Step 2: Secure the monitor to the stand with the supplied retention screws (
222H222H
Figure
4-17 ). Step 0:
Figure 4-17: Stand Mounting
4.4 Software
The IOVU-751R-CE5/UX-R10 comes with a pre-installed Windows CE 5.0 or Linux 2.6.x
operating system and a rich software application development kit. For information about
configuring the operating system, adding remote management tools or additional software
and drivers, refer to the user manuals on IEI IOVU Utility CD that came with the
IOVU-751R-CE5/UX-R10. The IOVU includes the following software: