2 compactflash® installation, Figure 2-2: aluminum back cover retention screws, Figure 2–3: compactflash® install – IEI Integration EP-308A v1.15 User Manual
Page 21
Advertising
EP-308A/EP-308AS POS
Page 11
Step 1:
Slice the hard drive on to connect with the SATA connector.
Step 2:
Fasten the screws.
S
te
p
0
:
Figure 2-2: Aluminum Back Cover Retention Screws
2.3.2 CompactFlash® Installation
This section covers the installation of the CompactFlash® card.
Step 1:
Remove the screw that holds the CompactFlash® card slot cover is place.
Step 2:
Install the CompactFlash® card in the slot indicated below.
Figure 2–3: CompactFlash® Install
Step 3:
Replace the cover and fasten the screws.
S
te
p
0
:
Advertising