9 thermal printer setup, 1 ep-308a thermal printer setup, 1 install the usb to serial bridge – IEI Integration EP-308A v1.15 User Manual
Page 31: Hermal, Rinter, Etup, Figure 2-17: usb to serial driver
Advertising
EP-308A/EP-308AS POS
Page 21
2.9 Thermal Printer Setup
The EP-308A has a 2.0” thermal printer connected to COM port through USB bridge while
the thermal printer of EP-308AS is connected directly through COM port. The following
sections describe the thermal printer setup procedures for the EP-308A and the
EP-308AS.
2.9.1 EP-308A Thermal Printer Setup
The internal printer of the EP-308A is connected to the serial port COMx through USB
bridge. To setup the EP-308A thermal printer, please follow the steps below.
2.9.1.1 Install the USB to Serial Bridge
Step 1:
Run "PL-2303 Driver Installer.exe"
Figure 2-17: USB to Serial Driver
Advertising