2 encoding – IEI Integration HDC-502E_SDK_Linux User Manual
Page 15
HDC-502E SDK (Linux)
Page 15
NOTE:
The audio format of the encoding and decoding settings is set by
default and can not be changed.
1.5.2 Encoding
After configuring encoding settings, the user can start capturing the video by following the
steps below.
Step 1:
Access to the main menu. Type 1 to select “1 Encoding” from the main menu.
fmb-0?>1
Step 2:
The following message shows. The option marked with * is the selected port for
capturing video. The unsupported port appears with an “unknown” message.
Type the port number to select or deselect the port. In this example, port 1 is
selected.
< Device list >
'Z'<-~~~~~~~~
Select following number. (* is current setting)
1 <*> /dev/h55fmb0
2 < > /dev/h55fmb1
y Ok
z Return
fmb-0?>
Step 3:
After selecting the port(s), type y.
fmb-0?>y
Step 4:
The current settings of the selected port shows as following.
[[[ Encoding - confirm -> Encoding ]]]