IEI Integration HDC-502E_SDK_Linux - Manual (Page 9)

HDC-502E SDK (Linux)
Page 9
/_______________________________________________________/|
| ||
| HDCapture SDK for HDC series ||
| SDK Version: r138 ||
| firm : 2011-0308-8041-0400 ||
| cpld : 502ec100 ||
| fpga : 502ef113 ||
| mcu : 8051a100 ||
| mmux-driver: 0.0.3.1 ||
| fmb-driver : 0.0.3.2 ||
| apl : 0.1.3.2 ||
| kernel : 3.4.2-1.fc16.x86_64
|||_______________________________________________________|/
-------------------------------------------------------------------------------
< Main menu >
Select following character.
1 Encoding
4 One-picture encoding
6 Encode settings
9 Exit
fmb-0?>
1.5 Video Capture
There two main procedures to capture video by the HDCapture SDK in Linux. First, setup
the encoding setting. Second, start capturing video. These two procedures are described
in the following sections.
1.5.1 Encoding Setting
Before capturing the video, please connect the hardware and follow the instruction below
to configure the encoding settings.
Step 1: Launch the HDCapture SDK (refer to Section 1.4).