IEI Integration HDC-502E_SDK_Linux - Manual (Page 16)

HDC-502E SDK (Linux)
Page 16
'Z'<-~~~~~~~->Enter
Current settings
Stream output File ./stream-0.mpg
Video format 1920x1080
Video framerate 60p
Video rate control CBR
Video bitrate 6000kbps
Audio format MPEG1L2
Audio bitrate 256kbps
Press <Enter> key to start encoding.
fmb-0?>
Step 5: Press Enter. The system shows the following message and starts capturing
video.
[[[ Encoding ]]]
Press <Enter> key to stop.
fmb-0?>
Step 6: Press Enter again to stop capturing video. Step 0:
1.5.2.1 One Picture Encoding
To encode just one image from the video, follow the steps below.
Step 1: Access to the main menu. Type 4 to select “4 One-picture encoding” from the
main menu.
fmb-0?>4
Step 2: The following message shows. Type the port number to select the port for one
picture encoding.
< Device list >
Select following number.
1 /dev/h55fmb0
2 /dev/h55fmb1