IEI Integration HDC-3x-Series_SDK_Windows - Manual (Page 13)

HDC-3x Series SDK (Windows)
Page 13
Step 3: Launch the Command Prompt application in Windows 7 as an administrator
(right click the Command Prompt and select “Run as administrator”).
Step 4: In the Command Prompt window, specify the 64-bit driver directory. Then, type
DriverInstaller to install the driver to the system.
Figure 1-7: Command Prompt – Driver Installation
Step 5: Follow Step 5 ~ Step 8 in Section 1.2 to complete installing the driver to a 64-bit
Windows 7 operating system.
Step 6: Check the device manager in the Windows control panel to ensure the driver
(MB86H55-REB PCI, DEVICE and WinDriver) has been properly installed. See
Figure 1-8 for the details.