IEI Integration HDC-3x-Series_SDK_Windows - Manual (Page 27)

HDC-3x Series SDK (Windows)
Page 27
2.3 Video Decoding
The HDCapture SDK also includes decoding function that decodes the video signal for
video output to the HDMI-enabled display device. To decode a captured video clip, follow
the steps below.
Step 1: Launch the HDCapture SDK.
Step 2: Bring up the Decoding page by clicking one of the Device # buttons. Click the
Decoding tab to access the decoding page.
Step 3: Click Ref button to locate a video file in the computer to decode.
Step 4: Select the video format of the selected video clip. The video format selected
here must be the same with the video format of the file selected in the previous
step.
Figure 2-5: Decoding Settings
Step 5: Close the window to save the settings.