IEI Integration AUPS-C20 v1.02 - Manual (Page 41)

AUPS-C20 UPS Module
Page 33
4.2.6 Setting
Click the SETTING tab to enable/disable buzzer, LAN and automatic DC output (Figure
4-21).
Figure 4-21: Application Setting
Functions can be set in the SETTING tab include:
Check to disable the buzzer that warns when the system is switching to
use battery power.
Check to enable the LAN for remote monitoring function.
Check to enable the remote computer to turn the system power on or
off.
Check to enable the AUPS-C20 to output power automatically when a
power adapter is connected to the AUPS-C20.
Set the battery capacity parameter for the system to shut down automatically. In this case, the
system will shut down automatically when the battery capacity is below 5%.
Set the power off delay time in seconds.