Lincoln Electric IMt913 MAGNUM 100SG SPOOL GUN - Manual (Page 11)

INSTALLATION
ASSEMBLY OF ITEMS INSIDE THE MAGNUM ® SPOOL GUN
FIGURE A,3
A-3
TOP VIEW
Spool Cover and left
handle removed
Machine Connections
1
2
4
3
P6 CONNECTOR PINOUT
MASTER KEY
6
9
7
8 1
1. Liner Assembly feeds all specified
wire.
2. Drive Roll: This Drive Roll feeds all
specified wires.
3. Idle Roll Assembly: Non-adjustable
tension setting for all specified wires
4. Incoming Wire Guide: Highly wear-
resistant.
5. P6 Connector Control Leads: Motor
Power and Trigger. (See
Maintenance Section for more
details)
6. Welding Power and Shielding Gas
Machine connection (Sealed with 2
o-rings).
7. Locking Knob: Independently retains
the wire spool on the spindle.
8. Liner Assembly: Includes a gas seal
with the cable connector and is the
outgoing wire guide.
9. Only 4 sub-assemblies: gun tube;
cable; wire drive; trigger.
10. Conical spring (not shown) serves
as the spool brake (use only with
aluminum alloy 5356).
4
3
2