Setup for data transfer – Accu-Chek insulin pump User Manual
Page 106
Advertising
Setup for Data Transfer
Follow the steps below:
1. Put your pump in STOP mode.
2. Press
d to move to the COMMUNICATION screen.
3. Press
f. The DATA TRANSFER screen appears and a melody signals that
your pump is ready to deliver data.
When the data transfer is finished, press
f to return to the STOP screen.
Set up your pump with a cartridge, adapter, and a new infusion set and put
it in the RUN mode, if necessary.
communi-
cation
STOP
screen
start data
transfer
stop data transfer
Chapter 5: User Menus
ACCU-CHEK Spirit Insulin Pump
105
ACCU-CHEK Spirit Insulin Pump
105
Advertising