ODL Standard Retractable Screen Door - replacement cartridges - Manual (Page 3)

Step
1
Step
2
Remove for “RTS”
Remove Screws on RTS
Take your screen housing down
Remove the screws used to hold your retractabale
screen housing to your entry door.
Be sure to keep screws in safe place. When you have
removed the screws, lay your housing on a soft
surface (a large carpeted floor area is suggested
as a workplace).
IMPORTANT: For the “RTS” product, you will have
to take your tracks down as well.
Remove tracks from housing (”RTS” Only)
For the “RTS” product, you’ll have to remove the 1/2”
screws that connect the track to the back of housing,
and pull tracks off from housing.
ODL ® Retractable Screen Replacement Screen Instructions
Remove
for “RTS”
Remove
for all
screen types