Otter Outdoors Pro Ice Cabin - Manual (Page 10)

Page 10
20. Slide the tent over the main frame bar
assembly, then fasten the velcro straps
on the inside of the tent to each main
frame bar. Note: Collapsing the center
and front main frame poles part way
down will make installation easier.
Ref. Diagram 17.
Tent
Main Frame
Assembly
Diagram 17
21. The canvas tent (Item 2) has a plastic trim seal sewn into the edge, snap the plastic trim seal to the edge of the
sled (Item 1). Start at the front left corner and work your way around across the back and up the opposite side.
Secure with extra self-tapping screws if needed. See detail A.
Ref. Diagram 18.
Diagram 18
Back
Left Side
Front
Right Side
Line up seam on the corner
Left Side Back
1
2
Detail A
Trim seal
Self-tapping screw