Otter Outdoors Pro Ice Cabin - Manual (Page 9)

Page 9
19. Install wind support bars starting in back (Item 5), up through center (Item 6), then between the front and center
main frame bars (Item 7) and finally with adjustable wind support bar (Item 8) in front. Ref Diagram 16.
Diagram 16
Bottom Main Frame Bar
Front Main Frame Bar
Center Main Frame Bar
Back Main Frame Bar
5
6 7
8
18. Set up main frame bars by grasping with both hands and pushing upward until button clicks into place. Start with
bottom main frame bar and continue to the back main frame bar pushing lengthened bars into appropriate position.
Ref. Diagram 15.
Diagram 15
Bottom Main
Frame Bar
Front Main
Frame Bar
Center Main
Frame Bar
Back Main
Frame Bar
Button Location
Both Sides
Note: Seat
assembly not
shown for clarity
Note:
There are two
holes that the buttons can
click into to optimize the
fit of the canvas.