Otter Outdoors Pro Ice Cabin - Manual (Page 5)

Page 5
23
21
Button
lock
10. Assemble Bottom Main Frame Bar: Insert the outer main frame bar (Item 13) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 22). Slide the sleeve (Item 21) over the main frame extension bar
(Item 9). (Line up holes with button lock, press lock in as you slide over the bar). Insert the black plug
(Item 23) into the main frame extension bar (Item 9). Insert outer main frame bar (Item 13) into sleeve (Item 21).
Cover end of main frame extension bar (Item 9) with black end cap (Item 24). Ref. Diagram 7.
Diagram 7
17
9
13
11. Attach Bottom main frame assembly (Assembled in Step 8) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 28). Ref. Diagram 8.
4
3
3
Diagram 8
28
Bottom Main Frame Assembly
9
13
Note:
Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.
22
14
22
22
22
Note:
Predrilling a
3/32” hole will make
installation of
screws easier.