Atlas Sound AH99-12ST - Manual (Page 3)

Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2006 ATLAS SOUND LP Printed in U.S.A. 000606 ATS002386 RevA 6/06 PP
INSTALLATION INSTRUCTIONS
AH SERIES LOUDSPEAKERS
8", 12", AND 15"
3
SAFETY INSTRUCTIONS
Please Read Carefully Before Installing or Operating
• Read all instructions carefully
• Heed all warnings
• Assure that the speaker is securely mounted
Hearing Damage
CAUTION:
All professional loudspeaker systems are capable of generating very high sound pressure
levels. Use care with placement and operation to avoid exposure to excessive levels that can cause
permanent hearing damage.
SUSPENSION & MOUNTING
Suspension or "fl ying" speaker systems requires training and expertise. Improper rigging of a fl
ying
speaker may result in injury, death, equipment damage, and legal liability. Installation
must
be carried
out by fully qualifi
ed installers, in accordance with all required safety codes and standards at the place of
installation.
A
5:1
design factor is a generally accepted minimum standard. However, legal requirements for overhead
suspension vary by municipality
, please consult your local safety standards offi
ce before installing any
product. We also recommend that you thoroughly check any laws and bylaws prior to installation.
Loudspeakers fl
own in theaters, nightclubs, conference centers, or other places of work and
entertainment must be provided with an independent, correctly rated and securely attached secondary
safety — in addition to the principle suspension point(s). This secondary safety must prevent the
loudspeaker from dropping more than (6") should the principle suspension device fail. If you lack the
skills, training, and proper ancillary equipment to fl
y a speaker system, do not attempt to do so.
For additional information regarding the suspension of loudspeakers or to purchase rigging materials,
please contact our friends at
ATM Group, Inc.,1635 E. Burnett St. Signal Hills, CA 90755.
www
.atmfl
yware.com
Telephone (562) 424-1100 and Fax (562) 424-3520
• Always assure power is of
f to amplifi
ers before making any connections
• Assure that all electrical equipment is properly grounded
• Keep instructions for future reference
• Should any questions arise after reading this document, please call Atlas Sound Tech Support at
800-876-3333