Powermate PM0106500.02 - Manual (Page 9)

9 Customer Hotline 1-800-445-1805
PORTABILITY KIT PART NUMBER: 0067337
TOOLS REQUIRED: 8mm and 10mm sockets and ratchets, block(s) of wood (minimum of 6” tall).
WHEEL INSTALLATION
1. Blocking up the alternator side of the generator, assemble the axle (item 70) to the carrier (align with holes in channel)
using two M8 bolts. Thread M8 nuts to the bolts to secure the assembly.
2. Slide the wheel (item 69) and washers (item 72) onto the axle , with the offset side of the wheel hub against the carrier.
3. Secure the wheel to the axle with the M10 nut (item 5).
4. Repeat above instructions for the remaining wheel.
FOOT INSTALLATION
1. Assemble the rubber feet (item 76) to the foot bracket (item 67) using M10 nuts (item 5).
2. Blocking up the engine side of the generator, place the foot bracket under the carrier channel. Thread M8 bolts through the
mounting holes and thread M8 nuts to the bolts to secure the foot bracket to the carrier.
HANDLE INSTALLATION
1. Assemble the handle (item 66) to the carrier (align with hole in tubing). Slide M8 x 55 bolt (item 77) through handle,
carrier, and washers (item 78) as shown in diagram and secure with M8 nut (item 6). Tighten until handle is securely
clamped to the carrier.
2. Repeat above instructions for the remaining handle.
PORTABILITY KIT INSTALLATION
English