Auralex SonoFlat System SFS-112 - Manual (Page 2)

Recommended Additional Installation Materials
• Caulk-gun (for Tubetak Pro) • Tape measure
• Carpenters Level • Small ladder (depending on ceiling height)
• Pencil
SonoFlat SFS-112 General Information
SonoColumn Installation Guide
Optional Additional Installation Materials
• Foamtak Spray Adhesive* • T-Pins
* This system includes Tubetak Pro Adhesive, which is safe to use on all included products. You may wish to use Auralex’s Foamtak Spray Adhesive
for quicker drying times. Foamtak is available through all Auralex authorized dealers.
➋
Apply Tubetak Pro to either the back or the
beveled edge of the SonoColumn, depending
on chosen placement.
➊
Mark intended location of each SonoColumn.
SonoColumn Placement Options
➋ ➊ ➍ ➌
Flush in corner At 45° to corner Side-by-side in corner On wall w/ Collars
Or